"A practical supplier guide to D-xylose (CAS 58-86-6): the five-carbon hemicellulose sugar used as xylitol feedstock, a Maillard browning agent, and a cosmetic humectant. Covers specs, sources, and sourcing notes."

-Deshangchemical-chemechemi

What D-xylose is, and why buyers keep asking for it

Somewhere between a bulk sweetener and a specialty reaction intermediate sits D-xylose (CAS 58-86-6), a five-carbon sugar that rarely gets the attention it deserves. Also written as D(+)-xylose or wood sugar, it has the formula C5H10O5 and a molecular weight of 150.13, with EINECS 200-400-7. It is the main building block of hemicellulose, which makes it the most abundant pentose on earth and, after glucose, the second most abundant monosaccharide in nature. If that sounds like a commodity, the demand pattern tells a different story: two quite separate industries buy it in steady volume, and neither of them uses it simply as sugar.

In the plant, D-xylose is locked up as xylan in the cell walls of hardwood and grasses, typically 20–25% of the material and up to 25–30% in birch bark, corn cobs and bagasse. That is why commercial xylose is extracted from these agricultural residues rather than fermented or synthesized. The origin matters: corn-cob and hardwood feedstocks give a consistent impurity profile, and a supplier who can name the feedstock is usually one who can hold a specification from lot to lot.

The numbers worth checking on a certificate of analysis

D-xylose comes as a white, fine crystalline powder, essentially odorless, with a clean sweetness roughly 40–50% that of sucrose. Physically it melts at 154–158 °C (literature), carries a density near 1.525 and a bulk density around 450 kg/m3, and shows a flash point above 100 °C. It dissolves freely in water — on the order of 117–125 g per 100 mL at 20 °C — and in hot ethanol, but is insoluble in cold ethanol and ether. The pKa is about 12.14 at 18 °C, and the material is dextrorotatory with mutarotation, with a specific rotation that settles around +18.6° to +20° depending on concentration and equilibration time. FEMA 3606 is the flavor designation most formulators quote.

Two points on the COA deserve a second look: assay and color, since a high-purity food-grade lot should be a clean white powder with low ash and tight limits on residual acids from hydrolysis; and moisture. Xylose is not especially hygroscopic, but it is a reducing sugar and will brown if held hot and damp. We cover similar ground in our notes on trehalose dihydrate (CAS 6138-23-4), where moisture control also decides how a sugar behaves on the line.

Job one: xylitol feedstock

The largest single use for D-xylose is as the starting material for xylitol. Hydrogenation of xylose gives the five-carbon sugar alcohol used in sugar-free chewing gum, confectionery, toothpaste and mouthwash. Xylitol has the useful property of being non-cariogenic, which is why it has displaced ordinary sucrose in a lot of oral-care and "tooth-friendly" products — the same positioning you see with isomalt (CAS 64519-82-0) in sugar-free tablets and lozenges. The economics are simple: a xylitol plant buys xylose by the tonne, and the purity of the feedstock sets how much refining is needed downstream. Buyers who are new to this chain often assume any xylose will do. In practice, low color and low residual impurities translate directly into a cleaner hydrogenation and a shorter purification train.

Job two: Maillard browning and flavor

The second use is smaller in tonnage but higher in value. D-xylose is a reducing sugar that reacts with amino acids far faster than glucose or maltose, which makes it a favored participant in the Maillard reaction — the chemistry behind the browned, roasted, savory notes in baked goods, roasted meats, coffee, soy sauce and pet food. Processors add a small dose to push browning along and build deeper color in a shorter cook. It works alongside aroma compounds such as ethyl maltol, vanillin and ethyl vanillin, where the sugar supplies color and roasted depth and the aroma molecules supply the top note. If you formulate savory flavors, test that combination at low levels before reaching for a heavier browning agent.

Beyond the two main uses

A third, fast-growing outlet is cosmetics and personal care. D-xylose is used as a humectant and in anti-aging systems, including some "skin-identical" sugar complexes aimed at supporting the skin barrier. It fits naturally next to other functional sugars such as N-acetyl-D-glucosamine (CAS 7512-17-6) and N-acetyl-alpha-D-glucosamine, both of which we supply for cosmetic and joint-health use. Paired with a humectant such as glycerol, it helps a formula hold water without the tackiness heavier sugars can bring. Oxidation to xylonic acid — a bio-based platform chemical convertible to 1,2,4-butanetriol and concrete additives — is a smaller outlet, but it helps explain why xylose capacity keeps expanding.

How it compares with the acids on the same shelf

Formulators often reach for an organic acid when they want pH control or a sour note, so it is worth being clear where xylose does and does not belong. It is a sugar, not an acidifier: for pH adjustment look at citric acid anhydrous or D-tartaric acid, and for slow acid release at setting, glucono delta-lactone (GDL). Xylose does something different: browning and mild sweetness rather than a sour bite. In a mineral system it can sit alongside calcium gluconate or gluconic acid without conflicting with the mineral profile, and where a formula needs oxidative stability, an antioxidant such as L-ascorbic acid (vitamin C) is the usual partner.

Handling, storage and practical notes

Store D-xylose sealed in a dry place at room temperature, away from strong oxidizers and sunlight; the main risk in long storage is caking rather than degradation. Because it is a reducing sugar, avoid prolonged heat with amines or amino acids unless the browning is intentional. Standard dust controls apply when tipping powder. For food and cosmetic use, ask for the relevant certificates — ISO, HACCP, kosher and halal are commonly requested — and confirm the spec sheet states food or cosmetic grade rather than a generic industrial grade.

Frequently asked questions

Is D-xylose the same as xylitol? No. Xylose is the sugar; xylitol is the sugar alcohol made by hydrogenating it. Xylitol is the sweetener in gum and toothpaste, while xylose itself is mostly an industrial feedstock and a browning agent.

How sweet is it compared with sugar? Roughly 40–50% as sweet as sucrose, with a clean, quick sweetness and very little aftertaste.

Is it suitable for sugar-free products? It is used to make them, and its low caloric value is useful, but because it is a reducing sugar it is normally converted to xylitol first rather than used directly as the bulk sweetener.

What shelf life can I expect? Typically two years or more when kept sealed and dry, with caking the only common issue in humid storage.

Sourcing note

We supply D(+)-xylose CAS 58-86-6 in food and cosmetic grade, with assay, color, moisture and impurity data on every lot. If you are scaling a xylitol line, building a savory flavor or formulating a humectant system, send us your target specification and annual volume and we will quote the exact grade you need. A sample request is usually the fastest way to confirm a lot fits your process.

Get a free quote!


+86-531-88752665

Qr code