"A practical supplier guide to D-(+)-glucono-1,5-lactone (CAS 90-80-2): the slow-hydrolysing acidulant used as a tofu coagulant, baking powder component, meat preservative and gentle pH adjuster. Covers specs, dosages and sourcing notes."

-Deshangchemical-chemechemi

Glucono-1,5-lactone: the acid that arrives slowly

Most acidulants do their job the instant they touch water. D-(+)-Glucono-1,5-lactone (CAS 90-80-2) is the exception. Also sold as glucono delta-lactone or simply GDL, it is the internal ester of gluconic acid — formula C6H10O6, molecular weight 178.14, EINECS 202-016-5. In dry form it is a white to off-white crystalline powder with only a faint sweetness and almost no sour note. Put it in water, though, and it begins a slow conversion back to gluconic acid (CAS 526-95-4), bringing the pH down over minutes to hours rather than seconds. That single behaviour is why a formulator reaches for GDL when a fast acid like citric acid or D-tartaric acid would act too quickly and spoil the texture.

The material is made by fermenting glucose and lactonising the resulting acid, so it sits in the same family as calcium gluconate and other gluconate salts. It is generally recognised as safe in most markets, which is why it turns up in everything from a block of tofu to a tablet disintegrant.

What the certificate of analysis should show

GDL is a white crystalline powder, melting around 160 °C with decomposition, with a bulk density near 0.6 g/cm3 and a water solubility of roughly 590 g/L at room temperature — notably higher than many sugars. The specific rotation is strongly positive, about +61.7° (c=1, water), and the optical sign is one of the quickest ways to catch a mislabelled or diluted lot. Storage is uncomplicated: keep it sealed and dry at room temperature. Because it hydrolyses in the presence of moisture, a bag left open in a humid warehouse will slowly pick up free gluconic acid and lose its controlled-release character. That is the main thing to check when a shipment has sat in a hot container.

For food use, buyers should ask for the assay, loss on drying, residue on ignition, heavy metals and a microbiological panel, plus confirmation that the material meets the relevant food-additive standard. For cosmetic or pharmaceutical use, the spec tightens around microbial limits and residual solvents.

Where it earns its keep: tofu and set dairy

The largest single use is as a coagulant for soy protein. GDL dissolves into soy milk and hydrolyses evenly throughout the liquid, lowering the pH uniformly and setting the protein into a fine, continuous gel. The result is a tofu with high water retention, a smooth, tender texture and a clean taste — a different outcome from the curd formed with calcium sulfate or magnesium chloride, which sets from the outside in and can leave a mineral note. A typical addition is around 2.5–2.6 g per kilogram of soy milk, dissolved in a little water first and then mixed in before the milk is held hot. Because the set is gradual, the process is easy to run in a continuous line rather than a batch kettle.

The same gentle acidification works in dairy, setting cream cheese and fresh cheese, and giving yogurt-style products a smoother gel than direct acid addition.

Baking powder and controlled gas release

In baking powder, GDL is paired with sodium bicarbonate. The lactone hydrolyses during mixing and again under heat, releasing carbon dioxide in two stages — a little during mixing and the rest in the oven. That gives a finer, more even crumb and avoids the sharp, soapy taste that leftover bicarbonate can leave. A common blend uses a GDL-to-bicarbonate ratio near 2:1, with GDL making up roughly 50–70% of the acidulant portion; total dosage in flour is commonly around 0.13%. It performs particularly well in cakes, biscuits and fried dough products, where a soft, uniform rise matters more than a violent one.

This delayed action is the reason it is specified in refrigerated doughs and ready-to-bake mixes, where a fast acid would spend itself before the product ever reaches the oven. For comparison, the hint of sweetness GDL leaves is closer to that of trehalose or maltose than to the clean bite of an inorganic acid.

Meat, seafood and preservation

In processed meat, GDL at around 0.3% improves water binding, colour and sliceability, and it helps suppress the formation of nitrosamines in cured products such as luncheon meat, sausages and frankfurters. Regulatory limits vary: China's food additive standard allows up to 3 g/kg in bean products, sausages, fish paste and grape juice, with a lower limit for fresh fish and shrimp preservation; FAO/WHO guidance sets a similar ceiling for comminuted meat. Local rules always win over a generic number.

Its mild antimicrobial effect also helps keep fish, poultry and shrimp looking fresh. And because the gluconate ion chelates metal ions, GDL limits tartrate haze in grape juice and berry wines and reduces scale formation on dairy equipment. That behaviour is shared with lactobionic acid, a related acid used in gentle cosmetic peels.

Beyond food: cosmetics and pharmaceuticals

In skin care, GDL is sold as a mild acidulant and pH adjuster. Because it releases acid slowly, it is far less stingy than L-ascorbic acid at the same pH and is often used alongside other humectant-style actives. It also appears in formulations built on N-acetyl-D-glucosamine and N-acetyl-alpha-D-glucosamine, where a gentle acidic environment supports the active without stressing the skin barrier.

On the pharmaceutical side, GDL is used as an acidulant and as a component of effervescent systems, where controlled gas release protects the tablet until it hits the glass. It is a natural partner to isomalt in sugar-free chewable tablets, and its slow release profile is useful in formulations that would otherwise degrade in a strongly acidic environment.

It would be wrong to lump it in with the aroma lactones such as gamma-nonanolactone or gamma-decalactone, which are valued for smell rather than pH, or with the polymer intermediate caprolactone. Same word, entirely different job.

Sourcing notes before you place the order

Decide first which grade you actually need. Food-grade GDL at 99% assay is a different purchase from a ph-grade lot with tight microbial specs, and paying for the latter when making tofu is wasted money — while buying the former for an injectable or ophthalmic application is a serious mistake. Ask about the fermentation feedstock, since glucose source and purification route influence the impurity profile. Confirm the particle size too: a fine powder disperses faster into soy milk, while a coarser grade handles better in a dry blend.

Packaging matters more than for most powders. Twenty-five kilogram kraft bags with an inner polyethylene liner are standard, and the liner should be intact on arrival. Store sealed and dry — GDL keeps for years, but a compromised bag will drift toward free gluconic acid and give a faster set than the recipe calls for.

If your process depends on a predictable pH curve, ask your supplier for a hydrolysis profile rather than only a COA. Two lots can share the same assay and still behave differently in the tank. We supply D-(+)-Glucono-1,5-lactone with full documentation and can share typical application dosages and handling data on request — send your target pH and process temperature and we will suggest a starting point.

Get a free quote!


+86-531-88752665

Qr code